Specifications
SKU: 12610732
Parameter | Value |
---|---|
Type | Relay, General Purpose |
Model | G2RL-14-E-CF-12VDC |
Coil Voltage | 12VDC |
Coil Power Consumption | 0.6W (50mA) |
Contact Form | SPDT (Single Pole Double Throw) |
Contact Rating | 10A, 250VAC / 30VDC |
Insulation Resistance | 100MΩ or more (500VDC) |
Dielectric Strength | 2500VAC for 1 minute |
Operating Temperature | -40°C to +85°C |
Storage Temperature | -40°C to +125°C |
Humidity | 95% RH at +40°C |
Life Expectancy | 100,000 operations |
Weight | 20g |
Dimensions | 17.5mm (W) x 12.5mm (D) x 26.5mm (H) |
Terminal Type | Solder Lug |
Instructions
Installation:
- Ensure that the relay is installed in a well-ventilated area to prevent overheating.
- Use appropriate soldering techniques to connect the relay terminals. Avoid excessive heat to prevent damage.
Power Supply:
- Connect the coil terminals to a 12VDC power supply.
- Ensure the power supply can provide at least 50mA of current to operate the relay.
Load Connection:
- Connect the load to the normally open (NO) and common (COM) contacts for operation when the relay is energized.
- Connect the load to the normally closed (NC) and common (COM) contacts for operation when the relay is de-energized.
Testing:
- Apply 12VDC to the coil terminals to energize the relay.
- Verify that the contacts switch as expected by measuring continuity between the NO/COM or NC/COM terminals.
Maintenance:
- Regularly inspect the relay for signs of wear or damage.
- Clean the relay with a dry cloth if necessary. Avoid using solvents that could damage the relay.
Safety:
- Do not exceed the rated voltage and current for the contacts.
- Ensure proper grounding to prevent electrical hazards.
- Follow all local electrical codes and regulations.
Inquiry - G2RL-14-E-CF-12VDC