Share:
Specifications
SKU: 12610842
| Parameter | Description | Value |
|---|---|---|
| Input Voltage Range | The range of input voltage that the device can operate within. | 4.3V to 24V |
| Output Voltage Range | The range of output voltage that the device can provide. | 0.8V to 12V |
| Maximum Output Current | The maximum current that the device can deliver at the output. | 3A |
| Efficiency | The efficiency of the conversion process from input to output. | Up to 92% |
| Operating Temperature | The temperature range in which the device can operate safely. | -40°C to 85°C |
| Storage Temperature | The temperature range in which the device can be stored without damage. | -40°C to 85°C |
| Protection Features | Built-in protection mechanisms to ensure safe operation. | Overvoltage, Overcurrent, Short-circuit, Thermal Shutdown |
| Package Type | The physical package type of the device. | SOP-8 |
| Size | Dimensions of the device. | 5.0mm x 4.4mm x 1.2mm |
| Pin Configuration | The arrangement and function of each pin on the device. | See Pinout |
Pinout:
| Pin Number | Pin Name | Function |
|---|---|---|
| 1 | VIN | Input Voltage |
| 2 | VOUT | Output Voltage |
| 3 | GND | Ground |
| 4 | EN | Enable (High to enable, Low to disable) |
| 5 | FB | Feedback for output voltage adjustment |
| 6 | PG | Power Good (Indicates stable output) |
| 7 | SENSE | Current sense input |
| 8 | NC | No Connect (Do not use) |
Instructions:
Power Supply Connection:
- Connect the input power source to the VIN and GND pins.
- Ensure the input voltage is within the specified range (4.3V to 24V).
Output Configuration:
- Connect the load to the VOUT and GND pins.
- Adjust the output voltage using the FB pin. Refer to the datasheet for specific resistor values.
Enable Control:
- Apply a high signal (≥2.0V) to the EN pin to enable the device.
- Apply a low signal (≤0.8V) to the EN pin to disable the device.
Monitoring:
- Monitor the PG pin to ensure the output is stable. A high signal on PG indicates a stable output.
- Use the SENSE pin to monitor the output current. Connect a sense resistor between the SENSE pin and GND.
Protection:
- The device includes overvoltage, overcurrent, short-circuit, and thermal shutdown protections. Ensure these features are not triggered by operating within the specified limits.
Thermal Management:
- Ensure adequate heat dissipation by providing a heatsink or sufficient PCB copper area around the device.
Storage and Handling:
- Store the device in a dry environment within the specified storage temperature range (-40°C to 85°C).
- Handle with care to avoid static discharge and physical damage.
Inquiry - IP6518
