Share:
Specifications
SKU: 12610922
| Parameter | Description | Value |
|---|---|---|
| Part Number | Unique identifier for the component | CM003 |
| Type | Type of electronic component | Capacitor |
| Capacitance | Amount of charge stored per unit of voltage | 10 μF |
| Voltage Rating | Maximum voltage the capacitor can withstand | 50 V |
| Tolerance | Variation from the nominal value | ±10% |
| Temperature Range | Operating temperature range | -40°C to +85°C |
| Mounting Type | Method of attaching the component | Through-hole |
| Case Size | Physical dimensions of the component | 5 mm x 10 mm |
| Lead Spacing | Distance between the leads | 2.5 mm |
| Material | Material used in the construction | Ceramic |
| Polarity | Indicates if the capacitor is polarized | Non-polarized |
| Operating Frequency | Frequency range for optimal performance | 10 Hz to 1 MHz |
Instructions for Use:
Handling:
- Handle the capacitor with care to avoid physical damage.
- Ensure that the leads are not bent or twisted excessively.
Mounting:
- Insert the leads into the PCB holes as specified by the lead spacing.
- Solder the leads to the PCB, ensuring a good mechanical and electrical connection.
- Trim the leads to a length of approximately 1 mm after soldering.
Soldering:
- Use a soldering iron with a temperature setting of 350°C (662°F) or less.
- Apply solder to the joint for no more than 3 seconds to prevent heat damage.
Testing:
- Before applying power, visually inspect the capacitor for any signs of damage.
- Use a multimeter to check the capacitance value and ensure it falls within the tolerance range.
Storage:
- Store the capacitors in a dry, cool place away from direct sunlight.
- Keep them in their original packaging until ready for use to protect from moisture.
Disposal:
- Dispose of the capacitor according to local environmental regulations.
- Do not incinerate the capacitor as it may release harmful fumes.
Inquiry - CM003
