Instructions for Using 74HC126

1. Power Supply:

   • Connect the V_CC pin to a power supply within the range of 2.0V to 6.0V.
   • Connect the GND pin to ground.

2. Input Signals:

   • Apply input signals to the input pins (IN1, IN2, etc.) ensuring that they meet the input voltage levels specified in the table.
   • For logic low, the input voltage should be between 0V and 1.5V.
   • For logic high, the input voltage should be between 2.0V and V_CC.

3. Output Signals:

   • The output pins (OUT1, OUT2, etc.) will provide logic levels based on the input signals.
   • For logic low, the output voltage will be between 0V and 0.2V.
   • For logic high, the output voltage will be between 2.4V and V_CC.

4. Propagation Delay:

   • The propagation delay time (t_pd) is the time it takes for the output to change state after the input changes. It is typically around 9ns at 25°C.

5. Temperature Considerations:

   • Ensure that the operating temperature (T_A) is within the range of -40°C to 85°C.
   • Store the device in an environment where the temperature does not exceed -65°C to 150°C.

6. Power Consumption:

   • The power consumption per gate is typically around 2mW at 5V and 10MHz.

7. Handling Precautions:

   • Handle the 74HC126 with care to avoid static damage.
   • Use appropriate decoupling capacitors near the power supply pins to ensure stable operation.

8. Pin Configuration:

   • Refer to the specific datasheet for the exact pin configuration and additional details.

By following these instructions, you can ensure reliable operation of the 74HC126 IC in your circuit.