Instructions for Use:

1. Mounting and Handling:

   • Handle the 200N3S with care to avoid mechanical damage.
   • Ensure proper heat sinking if operating at high power levels to prevent overheating.

2. Electrical Connections:

   • Connect the collector (C) to the load or power supply.
   • Connect the emitter (E) to ground or the return path.
   • Connect the base (B) to the control circuit.

3. Operating Conditions:

   • Do not exceed the maximum ratings listed in the table.
   • Ensure that the junction temperature remains within the specified range to avoid thermal runaway.

4. Storage:

   • Store the device in a dry, cool place to prevent moisture damage.
   • Avoid exposure to extreme temperatures outside the storage temperature range.

5. Testing:

   • Use appropriate test equipment to verify the device parameters before installation.
   • Perform tests under controlled conditions to ensure accurate results.

6. Safety:

   • Follow all safety guidelines when handling high-voltage and high-current circuits.
   • Use protective equipment such as gloves and goggles when necessary.

7. Troubleshooting:

   • If the device fails to operate correctly, check for proper connections and power supply.
   • Verify that the device is not overheating and that the heat sink is properly attached.
   • Replace the device if it shows signs of physical damage or if it fails to meet the specified parameters.