Instructions for Use:

1. Supply Voltage (Vcc):

   • Ensure the supply voltage is within the range of 2.7V to 5.5V to avoid damage to the device.

2. Operating Temperature (Topr):

   • The device is designed to operate within a temperature range of -40°C to 125°C. Ensure the ambient temperature does not exceed these limits.

3. Storage Temperature (Tstg):

   • When storing the device, ensure the temperature is between -65°C and 150°C to prevent degradation.

4. Output Current per Channel (Iout):

   • Each output channel can source or sink up to 50mA. For reliable operation, keep the current within 25mA to 50mA.

5. Quiescent Current (IQ):

   • The quiescent current is typically around 10μA and should not exceed 20μA under normal operating conditions.

6. Propagation Delay Time (tpd):

   • The typical propagation delay time is 30ns, with a maximum of 50ns. This is the time it takes for a change in input to be reflected at the output.

7. Power Dissipation (PD):

   • The maximum power dissipation is 700mW. Ensure adequate heat dissipation if the device is expected to operate near this limit.

8. Input Voltage Range (Vin):

   • The input voltage should be within the range of 0V to Vcc to avoid damaging the device.

Additional Notes:

• Always refer to the datasheet for more detailed information and specific application notes.
• Proper decoupling capacitors should be used near the power supply pins to ensure stable operation.
• Ensure all connections are secure and free from shorts or open circuits.