Instructions for K100E10NE

1. Mounting:

   • Ensure that the relay is mounted on a flat, stable surface.
   • Use the provided mounting holes to secure the relay.

2. Wiring:

   • Connect the input terminals (coil) to the control circuit.
   • Connect the output terminals (contacts) to the load circuit.
   • Ensure all connections are tight and secure to prevent arcing or loose connections.

3. Operation:

   • Apply the rated voltage to the coil terminals to activate the relay.
   • The relay will switch the contacts according to the control signal.
   • Ensure the load current does not exceed the rated current to avoid damage.

4. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Clean the relay contacts with a dry cloth if necessary.
   • Replace the relay if it shows any signs of malfunction or excessive wear.

5. Storage:

   • Store the relay in a dry, cool place away from direct sunlight and corrosive environments.
   • Avoid storing the relay in areas with high humidity or extreme temperatures.

6. Safety:

   • Always disconnect power before performing any maintenance or inspection.
   • Use appropriate personal protective equipment (PPE) when handling the relay.
   • Follow all local electrical codes and regulations.