Share:
Specifications
SKU: 12612415
| Parameter | Description | Value |
|---|---|---|
| Part Number | Unique identifier for the component | 60R190Q |
| Type | Type of component | Resistor |
| Resistance | Nominal resistance value | 60 Ω |
| Tolerance | Variation from nominal resistance value | ±1% |
| Power Rating | Maximum power dissipation at rated temperature | 190 W |
| Temperature Coefficient | Change in resistance with temperature (ppm/°C) | 100 ppm/°C |
| Operating Temperature | Range of temperatures where the component can operate safely | -55°C to +125°C |
| Insulation Resistance | Minimum resistance between conductive parts and earth | 1000 MΩ |
| Surge Withstand | Ability to withstand voltage surges | 1000 V, 10 ms |
| Mounting Type | Method of attaching the component to the circuit board | Surface Mount |
| Package/Case | Physical dimensions and shape of the component | 2512 |
| Standards/Compliance | Compliance with industry standards | RoHS, REACH |
Instructions for Use:
Handling:
- Handle the resistor with care to avoid mechanical damage.
- Avoid touching the resistive element to prevent contamination.
Mounting:
- Ensure the surface mount pads on the PCB are clean and free of debris.
- Apply solder paste to the pads as per the recommended amount.
- Place the resistor on the pads using a pick-and-place machine or tweezers.
- Reflow solder according to the recommended reflow profile.
Soldering:
- Preheat the PCB to 150°C to 180°C.
- Use a reflow soldering process with a peak temperature of 230°C to 250°C.
- Ensure the soldering time does not exceed 10 seconds.
Testing:
- After soldering, visually inspect the joints for proper alignment and solder flow.
- Measure the resistance value to ensure it falls within the specified tolerance range.
- Test the power rating by applying the maximum rated power and monitoring the temperature rise.
Storage:
- Store the resistors in a dry, cool place away from direct sunlight.
- Keep the components in their original packaging until ready for use.
Disposal:
- Dispose of the resistor in accordance with local environmental regulations.
- Ensure compliance with RoHS and REACH standards for waste management.
Inquiry - 60R190Q
